Kydex Holsters & Magazine Pouches

CURRENT HOLSTER / MAG POUCH WAIT TIME

The current wait from the time we receive your order until we ship is 4-5 weeks.

Our products are made of high quality Kydex.  We custom make each holster upon the order of the customer.  Each of them is subjected to our rigorous fit testing and final finishing, which allows us to produce high quality custom holsters, magazine holders, and other related gear.

To order a holster or magazine pouch go to the side menu and look under COC-LLC’s products.  Click on the product you are interested in. If you do not see something on our site, it is possible we can work to create it for you. 

We offer holsters for the following guns:

Beretta 92

Colt 1911, 1911 Full Size w/rail (Springfield Operator frame)

Glock 17/22/31, Glock 19/23/32, Glock 21, Glock 26/27/33, Glock 34/35

H&K USP 9mm/.40, H&K USP 9mm/.40 compact, H&K USP 45 ACP

Sig Sauer P226, Sig Sauer P229

Ruger LC9

S&W M&P 9mm/.40, S&W M&P 9mm/.40 compact, S&W M&P .45,

S&W M&P .45 compact, S&W M&P Shield 9mm/.40

Springfield XD 9mm/.40, Springfield XDM 9mm/.40

Desert Sand Glock Holster MD cut (shown above)

OD Green M&P Holster MD cut (shown above)

COC LLC 018

Black M&P Holsters w/ TLR-1s Tac Light MD cut (shown above)

 

 

COC LLC 065

M&P Holster w/ Surefire X300 Tac Light  MD cut (coyote tan shown left)

 

 

COLOR

The standard holster / mag colors we offer can be seen in the pictures – black, coyote tan, OD green, and desert tan.  We can make holsters in other colors upon special order.  There will be an additional cost and wait time for special colors.

KYDEX THICKNESS

We offer holsters and magazines in Kydex with 0.08 (standard) and 0.06 thicknesses.  The Kydex in 0.08 thickness is a little more rigid than 0.06.

SWEAT GUARD

low sweat guard (shown above)

medium sweat guard (shown above)

high sweat guard (shown above)

The sweat guard on each holster can be high, medium or low.  This is really a trade off based on comfort.  Our personal preference is the the low sweat guard.  Because each holster sits so close to the body, the medium or high sweat guard often rubs on a person’s side.  This can be a cause of discomfort with the holster.  The trade off comes because if you sweat a lot, you will get some of that sweat on your gun with the low guard.  We recommend wearing an undershirt so that your firearm does not sit directly against your skin.

HOLSTER CANT

The standard holster we make has no “cant”.  The normal “cant” for most holsters that utilize a “cant” that is 10 degrees.  The standard 10 degree cant provides a little more “conceal-ability” than if there were no “cant”.  Because our holsters hold the  firearm so close to the body, the “conceal-ability” advantage on holsters with a cant is relatively minimal.  Many shooters prefer not to “cant” the holster because of their drawing style and the speed it affords them when drawing.

HOLSTER CUT

The standard holster cut has a more squared off cut on the bottom of the holster.  The MD cut has the corners “clipped” on the bottom edges of the holster.  Most of the holsters shown are the MD cut.  Shown below is a holster with a standard cut.

Standard Cut Holster for Sig P229 w/ X300 in Desert Sand

 

Holster Belt Loops 2

Holster Belt Loops (shown above)

BELT SIZE

We offer belt loops for our holsters in 1.5″, 1.75″ (standard), and 2″ in either the straight style (upper right) or with the looped top (upper left).  Each style has its benefits with the looped top style allowing for a slightly lower carry on your hip. 

We can also make the loops to accommodate a web-style belt (standard) or a thicker leather carry belt.

The holster belt loops are different than the loops we use on the MD cut magazine pouches.  The size of the magazine holsters are smaller and use a different style loop.

The magazine belt loops come in sizes 1.5″, 1.75″, and 2″ (not available on MD / Slant  Cut).

 Black M&P Holster with Streamlight TLR-1s Tac Light mounted on a Blackhawk Thigh Rig using our mounting system (shown above)

BLACKHAWK COMPATIBLE

COC LLC makes an adapter that allows you to be able to use our Kydex holster with a BLACKHAWK thigh rig, QUICK DISCONNECT SYSTEM, or both.  This allows you to easily convert your CCW holster into a holster mounted on a tactical thigh rig by changing  a few screws.

Glock 26 Holster

P-Mag Pouch (shown above)

Single Mag Pouch with MD cut (shown above)

Single Mag Pouch Standard cut (shown above)

M&P Holster and Mag / P-Mag Pouch Combination (shown above and below)

Holster for a H&K USP 45 with Surefire X300 (shown below)

Smith and Wesson M&P Shield (shown below)

m&p shield

 Glock with X300 Tac Light in Coyote Tan with Cant and MD Cut (shown below)

Glock with x300 tac light

Desert Tan MD Cut Holster for a Glock w/ TLR-1 and Mag Pouch (shown below)

Desert Tan Glock Hosler and Mag Pouch MD Cut

Glock 26 and Mag Pouches

COC LLC 019

Kydex Custom Work

We can also make custom holsters and accessories not listed on our site depending on the degree of complexity.  Below are two examples.

Kydex Pistol Mags & PMag Combo

Pistol and P-Mag Combo Pouch

Revolver Thigh Rig

Revolver Thigh Rig

COC LLC 016

Revolver and Speed Loader